Given the cost of new doors and windows, it is hardly surprising that many homeowners, in Toronto and elsewhere, delay the decision to fit them in their properties as long as possible. However, when you look at the possible consequences of not installing new units in your home, you may change your mind and decide that the sooner you have the work done, the better. Firstly, new vinyl units may not be as expensive as you think and secondly, the cost of not replacing old doors and windows could be more than you had previously imagined.
Why Your Windows and Doors Should Be Replaced
Before you decide to put off replacing yours, consider the possible consequences of doing so, as outlined below.
- Higher Utility Bills – Older windows provide less insulation than modern units, as do older doors with panes of glass in them. This means that if you have particularly old doors and windows in your home, you could be paying more to heat and cool it than is really necessary. To establish exactly how much you could save by installing replacements, you should talk to a reputable contractor.
- Less Security – Windows and doors that feature single panes of glass are an open invitation for opportunist thieves in the area as they are very easy to break. Modern glass units, with at least 2 panes that are separated by a vacuum, are considerably more difficult to break. While far from impossible to gain entry through such units, the amount of time it would take and the attendant noise are enough to put off most potential intruders.
- Lower Property Value – Whether you wish to sell your home in the near future or borrow money on the capital invested in it, based on an appraisal from your bank, brand new windows and doors will increase its value and should therefore put you in a better bargaining position. While you may not recoup the total cost of replacement in the event of a sale, you will be able to enjoy the other benefits pointed out in this list until you decide to move on.
- Less Curb Appeal – Even with a fresh coat of paint, new shingles, eavestroughs, soffits and fascia board, your home will still look a little shabby if your doors and windows have seen better days. Installing replacements is a great way to give an otherwise nice looking Toronto property an instant and dramatic facelift.
- More Maintenance Work – Whether you do it yourself or pay someone to do it for you, there is no getting away from the fact that wood-framed windows and wooden doors require more care and attention than their vinyl and aluminum counterparts. If you prefer the idea of a good-looking, low maintenance property, you should seriously consider having replacement windows and doors fitted in the near future.
- A Noisier Home – The insulating properties that make modern vinyl units such a good choice for those who are trying to create an energy-efficient home have the added benefit of providing better isolation from outdoor noise. If you decide to put off replacing your current doors and windows, there is a very good chance that your home environment will be much noisier than it really needs to be. For peace and quiet, as well as peace of mind, new vinyl units are well worth considering.
If you are convinced that now would be a very good time to replace the windows and doors in your property, please feel free to get in touch with us to arrange for a free no-obligation estimate.
Vinyl windows are one of the most revolutionary breakthroughs in building technology of the last 100 years. Not only do they look great and seal your home up tight but they’re endowed with incredible durability which makes them one of the most attractive home improvement value propositions available. However, in spite of their proven track record some homeowners have doubts about whether these windows can stand up to the unforgiving climate of a place like Toronto. So in this post we’ll take a look at what makes vinyl replacement windows such tough customers and see if we can’t dispel some of those doubts as well.
The Impressive Durability of Vinyl Windows
In an age of dwindling resources vinyl replacement windows have earned a spot in the pantheon of building solutions that have responded positively to the challenge. Not the least among their many attributes is their amazing durability, even when faced with the most extreme environments. To understand how they do it you first need to understand the concept of weatherability.
- What is weatherability? – Weatherability is defined as a material’s ability to retain its integrity in the face of difficult or extreme environmental conditions including, but not limited to, rain, snow, temperature extremes, acid rain and UV light. A highly weatherable product will not display discoloration, disintegration (either external or internal), visible wear and tear or any other type of failure as a result of environmental conditions.
- How is it achieved? – The primary agent that provides a vinyl window its weatherability is Titanium Dioxide or TiO2. TiO2 is a naturally occurring chemical used primarily in pigments. Artists have long appreciated the bright, durable quality of TiO2 and put it to work in oil paints commonly sold as Titanium White. When added during vinyl production this chemical creates windows that hold their white lustre and resist degradation.
Weatherability is one reason vinyl windows are such a good match for the extreme environment of Ontario, another is the state-of-the-art double-pane glass employed to create an insulative barrier between you and the elements.
How They Work
Dual pane windows work by disrupting the window’s ability to conduct heat. The space between the panes of glass provides a buffer zone that prevents cold from penetrating inward and heat from escaping outward. Some double-pane windows employ an inert gas between the panes that aids in the window’s insulative ability. Dual pane windows provide other benefits as well.
- Superior noise reduction – Most people who replace their old, wooden, single-pane windows with today’s double-pane windows are shocked at how much quieter their homes become. That’s because the same buffer zone that breaks up heat conduction also absorbs sound.
- Significantly lower energy bills – Few other changes you can make to your home will provide the bottom line savings that vinyl, double-pane windows will. If you’re replacing leaky old wood framed windows your monthly savings could be dramatic.
- A more comfortable house – Double-pane vinyl windows will transform your home into a model of comfort and efficiency. No more sweaters at the dinner table. No more placing rolled up towels along the bottom of the doors to keep out drafts. Your home will be sealed against the elements and your quality of life will take a substantial step upward.
If you’ve had enough of trying to squeeze one more winter out of your decrepit, single-pane wooden windows call the experts at Toronto Doors and Windows and find out how affordable replacing those old windows with new double-pane, vinyl windows can be. Due to their incredible durability you’ll be making a long-term investment in the well-being of your home and everyone who lives there.
As much as 30% of the heat loss in a typical home goes straight out the windows. That means 30% of the heating oil you buy is wasted on warming up the air outside your home. Good for the birds maybe, not so good for your wallet. In order to bring the situation under control you’ll want to consider replacing your old windows with new, energy efficient windows, but exactly which windows to install in your home is not always clear.
Hgtv.com tackles the subject of replacement window installation and looks at the various options open to homeowners intent on bringing their energy bills down to earth.
Today, energy-conscious homeowners want to minimize the costs of heating and cooling their homes, and selecting the right windows is a crucial step. So how far should you go when choosing energy-efficient windows? The key is knowing what window upgrades will give you the biggest bang for your buck without delivering a blow to your bottom line.
Most people know a wood frame is less prone to heat and cold transfer than an aluminum one, since metals conduct temperature much more easily than wood. But that doesn’t mean wood is always the best choice for a utility-bill-friendly window. There are a variety of materials available for window frames, and each has positive and negative aspects.
When it comes to materials, window technology has advanced to the point that few will even consider wood framed windows any more. That leaves two materials as clear favourites for most homeowners. They would be:
- Vinyl – Vinyl windows are practically maintenance free. Vinyl is also a poor conductor of heat, meaning you needn’t worry about heat bleeding out through the window frames. Vinyl is also non-corrosive and will last for decades under normal conditions.
- Aluminum – Unlike vinyl, aluminum windows can be painted. They’re also stronger than vinyl and better at blocking out sound. However, they conduct heat and cold more effectively than vinyl which means they’re not a great choice for homes subjected to temperature extremes.
There’s more to energy efficient window installation than just materials however. It’s also important that you carefully consider the type of windows you install as different types leak air at different rates and that affects energy consumption. The most common types of window include:
- Casement – Casement windows are hinged along the side and have some of the lowest leak rates of any window. When they close the sash presses into the frame creating a tight seal.
- Fixed Pane – Fixed pane windows don’t open. Hard to beat that when it comes to preventing air leakage but a major drawback if you like to open the windows once in awhile.
- Awning – This type of window has hinges at the top and opens outward. Like casement windows, when they close the frame and sash form a nice tight seal that prevents air leakage.
- Double Hung – With double hung windows both sashes slide up and down. In the single-hung variant only the lower sash slides. This sliding however creates greater air leakage than other types of window exhibit.
- Double-Sliding – With this type of window the sliding motion is horizontal. Again with the single-pane variant only one pane will slide. As with double-hung windows, sliding creates more opportunities for air leakage.
You’ll also need to consider whether to purchase double or triple-pane windows. Each has their pros and cons. Both will do an outstanding job keeping the heat in your home, where it belongs, though triple-pane will do that job slightly better. Whether the marginally better insulation is worth the extra 25% or so you’ll pay for triple-pane will be something you’ll have to decide yourself.
Call the Window Installation Pros and Rest Easy
Lastly you need to keep in mind that even the most energy efficient windows won’t do their job very well if they’re poorly installed. Make sure you enlist the window pros from Toronto Doors and Windows to handle your window installation. We’ve been installing energy efficient windows and doors throughout the GTA for over 15 years and know how to get the job done right the first time. Call us on 647-932-3667 to schedule your window installation or to find out more about today’s amazing energy saving double and triple-pane replacement windows.
Are you looking to install patio doors in your home? Then you have come to the right place. We have got a lot of variety to choose from.
Basically you need to understand how the patio doors will function in your home. As you know the patio doors are used to connect an interior room to the patio. If it is a home, this room could be the living room, drawing room or even a bedroom. The patio doors could be made of wood in Victorian style as they look beautiful or could be mostly of glass.
If they are made of glass, they will project the view of the beautiful patio to the inside and when out on the patio the doors will have to be practical as well as aesthetically appealing to accentuate the beauty of the patio. Keeping these things in mind you can now decide what kind of patio doors you need to install.
Patio doors are available in sliding, gliding or in hinged form. You can either choose to have them opened towards inside or outside. Then you can have double doors which look really pleasant but they took up a lot of place while opening, then there are accordion type patio doors as well.
Glass doors rank quite high because of their versatility. They can be used practically everywhere-in houses, offices, hospitals and hotels. The good thing about glass doors is that they are very inexpensive as compared to solid wood or steel doors.
The glass doors could be fixed anywhere and in any kind of door frame. For instance glass could be used to make French doors, sliding doors, pocket doors, bi fold doors and accordion doors.
Depending on where the glass doors are going to be used, you can choose to have them colored or frosted or simply leave it plain. Glass doors could also be painted on to create unique designs that will only embody your home or office.
The glass doors can be decorated with stained glass and this will give a really beautiful effect when the sunlight shines through.
Glass doors, other than the reason that they are cheap, are also preferred to enjoy the beauty of one room or place while sitting in the other.
However in offices glass doors are utilized to give the executives their private space in the office while at the same time providing the ability to keep an eye on the subordinates.